This Problem it seems easy – easy difficult, one example case, I’ve got a piece of nokia 1650 that blink when turning on, try to flash with JAF many times but no success although using different firmware version and new problem appear “ contact service “
That makes me a little frustrate, after finding in many gsm forum I’ve got a little hope to solve the problem, I do this way.
First Erase Flash With JAF, this address
start address: 013F0000
end address: 013FFFFF
Then flash as usual mcu, ppm and cnt
If you have problem in local-test-normal mode, make it vpp disconnected between flash cable and phone board, use small paper or tape to close the contact.
